3.5" SST LIFT KIT - RAM 1500 2WD/4WD 2019-2021 69-1935

SKU: 69-1935

VENDOR: ReadyLift

$ 899.95

PRODUCT INFORMATION
Warranty Instructions
CUSTOMER REVIEWS
PRODUCT INFORMATION

ReadyLIFT offers a mild lift solution to properly enhance the stance and driving quality of the 2019-2022 Ram 1500 truck 2WD/4WD. Like the body design, the suspension design of the 2019-2022 Ram 1500 features some unique design elements that differ from the previous generation Ram. These differences were tackled by our engineers as a result, we now offer a new SST lift kit exclusively for the new Ram 1500 2WD/4WD trucks.

The 69-1935 SST lift kit provides 3.5" of front lift and 2" of rear lift. The new body style Ram now comes with a composite upper control arm with a sheet metal cover. Our engineers determined the the best kit solution would be to include our DOM tube steel upper control arms with corrected ball joint angles. The lift is delivered by way of CNC-machined billet aluminum top mount strut extensions and spring pre-load spacers. This combination generates a true 3.5" of front lift which is perfect for installing up to a 35" tall tire on a 20x9 inch wheel with a 0 offset. This lift works great without exceeding the CV limits which works well within the OEM tolerances.

The 2019-2022 has a new rear set up which requires an all-new fabricated steel rear coil spring spacer. This spacer provides 2 inches of rear lift and also includes rear bump stop extensions to control compression.

Our 69-1935 3.5" SST Lift Kit will get the job done right and affordably.

Not for use on factory air suspension equipped trucks.

Note: NOT intended for off-road use or abuse. 

Note: If running a 35x12.50-20, the minimum wheel offset is 0 offset on a 9" wide wheel. If running a 295/65-20 the minimum is a +18 offset to ensure the tire does not rub the control arm at full turn. 

Tire Fitment: Kit Components:

Tubular upper control arms with corrected ball joint cup angles and heavy-duty ball joints

CNC machined billet aluminum top hat spacers and pre-load spring spacers

Heavy-duty fabricated steel rear coil spring spacers

Fabricated steel rear bump stop landing pads

SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
Fitment
Warranty Instructions
CUSTOMER REVIEWS

This is a standard cookie notice which you can easily adapt or disable as you like in the admin. We use cookies to ensure that we give you the best experience on our website.

3.5" SST LIFT KIT - RAM 1500 2WD/4WD 2019-2021 69-1935

3.5" SST LIFT KIT - RAM 1500 2WD/4WD 2019-2021 69-1935

$ 899.95